Thursday, January 31, 2013

TRF 417V5 417X Comparison

IMG_3874

V5 is on top, X is on the bottom. All pictures link to full resolution so you can see all the detail. Immediately you can see the different dampers used. V5 is using aeration damper. Supposed to give better traction on low grip surfaces and some people are saying they need to be rebuilt more often. I don’t know if this is true yet.

IMG_3875

The rear differential cups are different.

IMG_3799IMG_3812

The V5 on left has six screws in the rear portion of the top deck, the X on right has eight.

IMG_3804IMG_3814

Another big change is the floating servo on the V5 (left) and a regular one on the X (right).

IMG_3831IMG_3833

The V5 (left) has a two piece motor bulkhead, the X (right) has a three piece (with the lower mount).

IMG_3847IMG_3848

On the V5 the floating servo mount and the motor bulkheads have pegs that fit perfectly into the chassis.

IMG_3865IMG_3868

The V5 (left) comes with Double Cardan Joint shafts, the X (right) comes with standard universal shaft.

From Tamiya: This Double Cardan Joint Shaft features two joint sections to minimize rotational vibrations for better suspension feel. The shafts are made from high-strength steel and are especially ideal for use with direct couplings (Spools). The overall length is equivalent to that of a standard 44mm universal drive shaft.

IMG_3837IMG_3835

The V5 (left) comes with split suspension blocks in the front, the X (right) comes with a single piece suspension block (but has holes for split blocks if you want to put them on).

IMG_3878

The V5 (above) has a narrower chassis since it uses the floating servo mount. It also uses a different battery holder from the X (below).

IMG_3842IMG_3843

IMG_3839IMG_3871

Above is a couple of shots from the V5 with the battery installed.

IMG_3841IMG_3844

I especially found the screw on the inside of the V5 (left) servo mount clever! I clearly should not be running a stick pack in my X, since the battery holders don’t even touch it Smile

IMG_3846IMG_3845

The V5 (left) has a lot less cut-outs in the lower deck than the X (right)

IMG_3859IMG_3858

V5 on the left, X on the right.

IMG_3850

Btw, they’re both awesome. At the moment the V5 feels better because it’s freshly built and placebo Smile I have a transponder now and given my current driving skill level, my TA05 M-Four had the best lap times on a very low grip day at West Coast RC Raceway.

No comments:

Post a Comment